Replacement Lexus keys are available at the dealership or with the help of a competent locksmith in your region.
The primary distinction between the two is that a car locksmith will come to you, whereas you must tow your car to the dealer to get a key created there.
In This Article...
Program a Lexus Key
Lexus auto keys and fobs are available from local locksmiths, online, or in the parts department of a Lexus dealer near you.
You still need to cut the blade, program the transponder chip, and enable the remote/keyless functionality after purchasing a replacement key or Lexus fob.
A Lexus smart key must be programmed using diagnostic equipment. Customers who only had one key and decided to order a spare online might need to get in touch with a local automotive locksmith to have the key cut and programmed.
Lexus Key Replacement Cost
There are four different price ranges for a locksmith to replace a lost Lexus key.
- 19901997 ($120150) (basic key, no chip
- Early transponder, requires a new ECU or a reflash of the current, 1997-2003, $280-$400
How much does a Lexus key cost to make?
Getting a replacement for a vehicle key fob that has broken down can be expensive and time-consuming. If you drive a Lexus or another high-end car, the cost can be higher than you anticipate. Losing your key fob can also be an expensive mistake, but with enough preparation and information, none of these situations needs to be a major source of anxiety for you.
Start by examining the battery and button functionality of the key fob before considering replacement. If you’ve had your automobile for a while, a dead battery might only need to be replaced. Additionally, the buttons may become stuck or cease to operate due to normal wear and use. The simplest form of replacement is this one. The “guts” of your key fob can be swapped out for a newer model for less than $50 if you buy a replacement key fob shell from one of the many online retailers. Install a new battery at the same time; it will only cost you roughly $6. You can use your updated fob immediately.
If you believe the problem with your fob extends beyond normal wear and tear, you should contact your local Lexus dealer or a locksmith that is certified to provide new key and fob services. Both options need you to have your identification, vehicle registration, ownership documentation, and VIN on hand. Getting a full key fob replacement is just the start because luxury car brands are so technologically advanced. To program your fob and make sure it functions exactly as well as the original, you also need the correct help. The about $375 cost of each replacement key fob may be paid if you go via a dealership and your car is still covered by warranty. Consider hiring a locksmith if you’ve lost your key and are locked out. You can take advantage of their emergency service hours and the price may be slightly less than a dealership. Your insurer or a roadside assistance provider may be able to compensate you for their services.
How much time does it take to make a Lexus key?
It might just take 15 minutes to replace the battery in your key fob, if that’s all it needs. Our parts department may need to order a replacement, necessitating a wait period of two to three days, depending on the make and model of the vehicle and the precise type of key. Please contact us to set up an appointment whenever is most convenient. Depending on the kind of key you have, the price will change.
The dealer will want access to your car, either at the dealership or at the site of the vehicle, in order to test the remote and mechanical key functions. The repair procedure will be detailed on a Repair Order; there can be an additional service fee associated with this procedure.
Does AutoZone produce automobile keys?
We provide keys for a variety of vehicles, including Chrysler Ford GM Nissan Toyota, and more, without the need for appointments. Before you leave the store, the cuts are digitally checked and the keys are precisely replicated. So why worry about only having one car key when AutoZone is the solution?
Can you do it yourself to configure a Lexus key fob?
The lock/unlock method cannot be used when a key is being replaced or when a new spare is being obtained. The new fob will need to be software-programmed instead. Before we begin, let’s take a moment to pause. A new key fob needs to be programmed using specialist tools. You require an OBD2-to-USB cable in particular, and it must support the VIM communication protocol. A functional key remote is also required. The method won’t function without each of these resources. The good news is that you can always visit a licensed mechanic with the new key. Even if you’ll be compensated for a service, you can rely on it working because they’ll have the necessary tools.
The Toyota TIS Techstream program will first need to be installed on your computer. Technically, you can accomplish this with any Windows machine, but a laptop will make things lot simpler. In the end, a cable will connect the car and the computer directly.
You’re going to use your OBD2 cable to connect the car to the laptop since your software is already installed and operational. In order to get the two communicating, you’re going to hit the Engine Start button two times without placing your foot on the throttle. Without actually starting the engine, this will activate the vehicle’s computer.
You ought to have the option to connect to your car in your TechSTream program. Your car will be automatically detected by the program, and you may use the information that is shown to verify that your connection is strong.
The main menu is now visible on the screen. You should utilize it to access Smart Access. You then choose Utility, followed by Smart Code Registration.
obey the directions displayed on the screen. They will guide you through the registration process for the new fob. Both keys will be required for a number of processes that must be completed before the new fob can be registered and used. You must register each key one at a time if you need to register more than one.
Make vehicle keys AutoZone or O’Reilly’s?
The majority of AutoZone and other auto component retailers exclusively sell vehicle key duplication, transponder keys, and fobs; they do not produce or cut house or padlock keys.
However, some AutoZone staff have claimed that they offer to cut house keys, and they do sell house key blanks (such as Schlage blanks) on their website for about $10.
To find out if your neighborhood Autozone provides this service, you would need to give them a call. If not, take a look at Home Depot or my comprehensive list of locations to produce keys.
O’Reilly does key fobs program?
The Art of Lock Picking is funded by its readers. We could receive an affiliate commission if you make a purchase using links on our website.
Over 20 million keys are typically lost by Americans each year! You know how frustrating it can be until you get a replacement key produced if you’ve ever lost the key to your house, apartment, car, motorcycle, or RV and didn’t have a spare. Since hiring a professional locksmith can occasionally be expensive, you might be wondering where else you can order keys.
Car keys of many kinds and models are produced by O’Reilly Auto Parts. They can configure your remote keyless entry system and transponder key as well as build and sell key fobs. The keys can be ordered online.
Since there are thousands of O’Reilly Auto Parts locations around the country, going there to get a key produced is quicker and easier than finding a locksmith. They have self-serve kiosks and provide key-cutting services. Discover what keys O’Reilly Auto Parts makes, sells, and how to order one by reading on.
Do Home Depot’s automobile keys exist?
Although Home Depot is largely a home improvement business, they also manufacture automobile keys and can program transponder keys and key fobs. The cost of keys can range from $2 to $169 depending on the make and model of your car.
However, in order to use the key duplication service offered by Home Depot, you must have a functioning car key for them to copy. The best and least expensive solution if you’ve lost your key is to go to a locksmith.
Without my original car key, how can I program my new one?
If you purchased a new key from the dealer, follow these easy steps to program your transponder key without the original key. Only some car models will be compatible with this, and occasionally you may require more sophisticated diagnostic equipment. But before phoning your authorized dealer, you might want to attempt these simple and cost-free methods.
Turn on Ignition
Put the key in the ignition while seated in the driver’s seat. Position the ignition so that it is ON. There should be a security light on.
There might be an issue with the car battery if you can’t see the security light. Check the voltage and, if necessary, charge it.
To guarantee that the voltage will remain constant throughout the procedure, use a car battery charger.
Wait
For 15 minutes, the security light must be on. If you want to program the key, do not touch the system for at least 15 minutes.
You could pause the timer and go outside. After all, you have plenty of things you can do while you wait for 15 minutes.
Switch Off and On
After 15 minutes, the security light ought to turn off. Keep a tight eye on it; you’ve got three minutes to get back to the key after this.
Reverse the key’s direction such that it is now in the ON position. Once more, the security lamp will be on for 15 minutes.
Repeat Steps
At around 15 minutes, the security light will turn on once more. The steps from the previous stage will be repeated by you. Restart the key by turning it off and on.
This ought to turn on the security light once more. You might be getting tired now, with only another fifteen minutes to wait. But this ought to be the last time you have to take this action. These easy steps should produce the key and have it ready to use in 45 minutes. Make sure the key starts the car by testing it. Just remember that the original key won’t work anymore. It won’t operate if you happen to discover it after programming a new key.