The larger Lexus GS300 sedan’s 2JZ-GE 3.0-liter DOHC 24-valve straight-six, which may be traced back to the previous Toyota Supra, is the same engine that powers the IS300.
In This Article...
When did the Lexus IS300 get a 2JZ engine?
Every IS300 produced between 1998 and 2003 has a 2JZ motor. This engine is a 2JZ-GE, which is the same as the one in a Toyota Supra. The IS300 has become a favorite among those who enjoy customizing Japanese automobiles because they are renowned for producing a lot of power when modified.
In the IS300, the 2JZ standard engine developed 217 horsepower and 218 pound-feet of torque. Depending on the arrangement, this was mated to either a 5-speed automatic or 5-speed manual transmission. The SportCross wagon was initially solely offered with the automatic, but over time, third-party retailers have started to replace them with the manual.
Due to its Supra-like engine, available manual transmission, and rear-wheel drive, the first generation IS300 is a renowned little sports sedan. These elements work together to make the IS300 a fantastic, entertaining sports sedan.
What vehicles arrived with the 2JZ?
vehicles with the 2JZ-GE engine:
- Lexus IS300 and Toyota Altezza AS300.
- Lexus GS300/Toyota Aristo.
- Toyota Majesta/Crown, a Toyota model.
- Toyota Cresta, Toyota Mark II, and Toyota Chaser.
- Origin Toyota.
- Toyota Advances.
- Lexus SC300 / Toyota Soarer.
- Subaru Supra.
Which Lexus model has a 1UZ?
The first generation Lexus LS 400/Toyota Celsior introduced the 4.0 L; 242.1 cu in (3,968 cc) all-alloy 1UZ-FE in 1989. The engine was gradually released across a number of different models in the Toyota/Lexus lineup. With a bore and stroke size of 87.5 mm and 82.5 mm, the engine is oversquare by design (3.44 in3.25 in). [2] With features like 6-bolt main bearings and belt-driven quad-camshafts, it has proven to be a powerful, dependable, and smooth engine. The timing/cam belt also powers the water pump. Steel is used in the construction of the crankshaft and connecting rods. Hypereutectic pistons are used.
One of the few road-going engines with FAA approval for use in aircraft is the FV2400-2TC variant.
Its standard, original trim produces 191 kW (256 horsepower; 260 PS) of power and 353 Nm of torque (260 lbft).
[2]
With lighter connecting rods and pistons and an improved compression ratio to 10.4:1, the engine had a minor revision in 1995 and now produces a maximum of 195 kW (261 horsepower; 265 PS) at 5,400 rpm and 365 Nm (269 lbft) at 4,400 rpm.
With the introduction of Toyota’s VVT-i variable valve timing system in 1997 and an additional 10.5:1 compression ratio increase[2,] output and torque were increased to 216 kW (290 hp; 294 PS) at 5,900 rpm and 407 Nm (300 lbft) at 4,100 rpm. 224 kW (300 horsepower; 305 PS) at 6,000 rpm and 420 Nm (310 lbft) at 4,000 rpm were the output ratings for the GS400.
The Ward’s 10 Best Engines list for 1998 to 2000 included the 1UZ-FE.
[4]
[5]
How far can a 2JZ travel?
There are several reasons why the fourth-generation Toyota Supra is legendary, but one of them is its dependability. The 3.0 liter 2JZ straight-six in this Supra, which has allegedly racked up 520,000 kilometers, is particularly bulletproof. The motor, according to the owner, has also “never been touched.”
The owner of the vehicle provided Hoover Toyota in Alabama with these photos. Although the Supra isn’t for sale, the dealer nonetheless posted images and details about the vehicle on Facebook.
Despite having 520,590 miles on the clock, the non-turbo Supra is said to be free of rust and to have undergone no significant engine work. Unfortunately, no other information is given, such as the year of manufacturing or other characteristics. This Supra only has 220 horsepower, which is 100 fewer than its turbocharged predecessor.
You can make fun of Toyota for producing a decent number of unremarkable, ordinary cars, but you must recognize that every product it produces is dependable. You can be sure it will last whether it’s a humdrum Camry, a 4Runner, or a Supra like this.
Can a 2JZ GE be turboed?
When it comes to turbocharging a 2JZ-GE engine, there are numerous possibilities. For a 2JZ, turbo kit options are the least expensive and most practical way to implement forced induction. If achieving large power goals is the ultimate goal, some people choose a custom arrangement. We will be mostly focused on pre-made kits to avoid misunderstanding as custom turbo setups are very specialized and specific to each individual automobile.
The 2JZ-GE is available with a large selection of turbo kits, just like the majority of highly customizable engines. Choosing the ideal turbo kit for your unique needs necessitates taking many things into account. What budget have you set out for a kit? What kind of power are you seeking? What auxiliary modifications are necessary to run each kit?
Fortunately for you, we’ll examine a couple of the most popular 2JZ-GE turbo conversion kits and go through their advantages and disadvantages.
Are the Lexus 2JZ and Supra the same?
A 3.0 liter, six-cylinder engine known as the 2JZ-GE powers the Lexus IS300. Fans of the MkIV Supra ought to be acquainted with its engine code. Although it had a few internal tweaks and no turbos, the engine was fundamentally the same as the one in the Toyota Supra. An engine that, incidentally, the JDM Altezza never provided.
The Lexus IS300 produces 215 horsepower and 218 lb-ft less power than the Supra without turbos (alone). That is, at least, the stock production. Owners frequently install Supra turbos on their Lexus IS300s. According to Jalopnik, the 2JZ’s iconic status is directly related to how overbuilt it was. The Bubble Era, which gave the world the Skyline GT-R and Autozam AZ-1, came to a close at this time. According to Jalopnik, owners could theoretically triple the IS300’s output without any problems with the right tune.
Additionally, according to MT, there were the TRD-tuned Lexus IS300 L-Tuned versions. Stage I automobiles have a body kit, fog lamps, and an 8 horsepower stainless steel exhaust. New springs, bigger anti-roll bars, cast-aluminum wheels, and Michelin Pilot Sport tires are added to Stage II versions. They ride one lower as well. Additionally, a limited-slip rear differential was a choice.
The best 2JZ engine is which one?
19 stars have been awarded to the 1JZ-GTE. 20 stars have been awarded to the 2JZ-GTE. The 2JZ-GTE comes out on top! Both engines are excellent; however, the 2JZ-GTE has certain advantages due to its displacement, while the 1JZ-GTE has advantages due to its somewhat lower price. Both engines are quite similar in terms of performance out of the box and tweaking possibilities. You’ll be on to a winner if you can get your hands on one of these engines.
With that said, a winner must be declared, so congratulations. 2JZ-GTE You *just* edged out your older brother for first place.
- x x 19 1JZ-GTE
- x x 20 2JZ-GTE
What model of Lexus is a Supra?
The initial version of the Lexus SC, sold in Japan as the Z30-gen Toyota Soarer, wasn’t particularly athletic. According to Hagerty, it made its debut in the SC400 variant with the 250-hp 4.0-liter V8 and 4-speed automatic from the modern LS400. To be fair, Car and Driver claims that the Mk4 Toyota Supra could also be bought with that automatic.
However, Lexus released the SC300 in 1992. According to Dust Runners Auto, it included leather seats, wood trim, and motorized adjustments for “everything,” just like the SC400. Additionally, traction control was an add-on option. But the Lexus SC300 has a 3.0-liter six-cylinder engine with 225 horsepower and 210 lb-ft of torque in place of a V8. It is effectively a Mk4 Toyota Supra engine because it is the same as the one found in the first-generation IS300.
What makes 2JZ so strong?
Why is the Toyota 2JZ inline-6 engine a renowned engine in the automobile industry? A brand-new video delves deep into the engine’s internals and explains why it’s so perfect for producing significant power with stock internals.
The engine in the video is essentially the same engine that was in the last Toyota Supra, which is from Papadakis Racing. Its variable camshaft timing on the intake comes from a Toyota Aristo, also known as the Lexus GS in the United States. The remainder of the movie essentially demonstrates how the engine was disassembled, but while doing so, we can see what makes the engine unique. We may thank Japan’s bubble economy for the over-engineered, extraordinarily long-lasting engines that the auto industry produces.
The 2JZ engine is quite durable to begin with because it has a cast-iron block and a closed block. The engine is equipped with bucket-type lifters, which are highly dependable but don’t fit larger camshafts effectively. The number of moving parts is significantly less than, say, a rocker arm system. The head gasket itself appears to be in decent condition for an engine that has been in use for more than 20 years when the head is removed.
Toyota equipped the 2JZ with extremely durable head gaskets and a closed block design, which contributes to the problem. The absence of water openings all around the cylinders makes them incredibly durable. Because of this, tuners can extract a lot of power and boost from the standard internals. Three layers of steel make up the multi-layer head gasket itself. The construction helps create a very tight seal around the cylinder and prevents the gasket from blowing.
For the mechanical types, the rest of the film is pure zen, so relax and take in the teardown above.
Why is 2JZ so well-liked?
The 2JZ engine, a storied engine in the tuner scene, is what gave the last year of the Supra its enormous popularity. The closed, over-engineered engine design enables the utilization of significant boost on internals that are already in place. The 2JZ can survive a lot of punishment because to this plus the inherent durability of any inline-six engine architecture, but the best way to really appreciate how Toyota created the 2JZ to be so resilient is to go inside one.
Stephan Papadakis, owner of the wildly successful Formula DRIFT team Papadakis Racing, dissects the 2JZ engine and explains how it functions in order to examine the design.
The twin-turbo 2JZ engine was not unique to the Supra, despite it having gained popularity because to it. Toyota also employed a variation in the Aristo, a vehicle that underwent a US rebranding to become the Lexus GS. The variation Papadakis examines on screen makes use of variable camshaft timing on the intake.
There is a fairly definite take down order to it, even though a large portion of the disassembly is very much identical to disassembling any engine. The advantages of the powerhouse are evident in almost every component, working inward from the outside.
Four valves per cylinder are made possible by the dual overhead cams, which also permit a top plug design for the best spark and a superior air/fuel mixture and flow. Although this prevents the use of really aggressive cams, bucket style lifters sit on the camshaft lobes, which decreases the number of moving parts in the engine and improves reliability.
Toyota employed a multi-layered steel head gasket for this engine, which lowers the likelihood that it may blow, and a closed-block design, which supports the cylinder walls. Toyota attached a girdle to the underside of the 2JZ to increase the block’s stiffness while still allowing access to the rotating assembly. The rotating assembly is finally made practically indestructible by a forged crankshaft, a wide bearing design, and a lot of thrust bearing. It is not at all unexpected that this engine has been so successful with the tuner community.