There are numerous things that can go wrong because the VSC system is connected with the engine control and the brake control systems to control your car’s traction.
A bad accelerator pedal, faulty throttle body, faulty ABS sensors, or a faulty mass airflow sensor are the most typical reasons of a VSC light.
The quickest way to determine what set off your VSC light is to use a diagnostic scanner to read the issue code memory.
In This Article...
Driving with the VSC light is on is it safe?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
How much does a Lexus VSC repair cost?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts.
How do I turn off my Lexus’s check VSC light?
Pressing and holding the TRAC/VSC switch when the automobile is stopped for more than three seconds will turn these systems off. The multi-information display should then display “Traction Control Turned Off” and the VSC OFF indicator light should turn on.
C1201:
The two P0 codes indicate that the emissions system has a leak. Technically, it might be in the charcoal canister or filler neck, but most of the time it’s just a leaky gas cap. Either a worn-out cap or one that was put incorrectly.
The car is instructed to switch on the check engine light and turn off the traction and VSC by the C1201 code. In essence, this code is responsible for alerting you to an issue when the other two appear. Since they are the ones that created it, fixing the other codes should also repair this one.
Why are my traction control light, check engine light, and flashing VSC light on?
You must stop driving the car if the check engine light is flashing. If the engine controller has identified a problem with the engine management system, the check engine light will illuminate steadily. If the defect is likely to harm the catalytic converter, it will flash. The VSC light, which is for the Vehicle Stability Control system, is likely signaling that whatever issue is present, it affects both systems. In other words, you probably only need to do one repair to fix both lights. The warning lights also let you know that the controller has failure codes that can be read by a specialist using the right scanning tools. The diagnosis will be aided by this. If you get in touch with YourMechanic, they’ll send a specialist to your house or place of business to check your car’s controllers for codes and advise you on the best course of action.
What location does the VSC button have?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
Can my Lexus be operated when the check engine light is on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise not driving your Lexus while the check engine light is flashing and setting up Lexus service right away.