PCS improves your feeling of distance from any obstructions in front of you when driving, giving you peace of mind.
Collision avoidance is the first step in collision protection. You will always be in the best position to respond to the road ahead thanks to the Pre-Collision System with Pedestrian Detection. The Pre-Collision System keeps an eye out for other cars and pedestrians in the area in front of your vehicle, providing alerts if a frontal collision is possible and enhancing your braking abilities if one is unavoidable.
PCS thoroughly scans the road using a millimeter-wave radar sensor and camera to find vehicles, bicyclists, and pedestrians.
The driver is alerted by both aural and visual indications if a collision is predicted, enabling them to take evasive action. Additionally, Brake Assist boosts braking pressure and automatically engages the brakes to prevent collisions and minimize damage if the system determines that a collision is likely or unavoidable.
PCS improves your feeling of distance from any obstructions in front of you when driving, giving you peace of mind. Unfamiliar roads become easier to manage since PCS helps you stay alert to other drivers, allowing you to unwind and enjoy the trip.
In This Article...
How do computers on a Lexus switch off?
You must access the steering-wheel-mounted switch on the multi-information display screen that resembles a cog (gear) and choose Pre-Collision System to personalize or disengage PCS (“PCS). From this point, you can modify the time of the alerts or turn the system off.
What does PCS in a car mean?
Early Collision System (PCS) PCS makes use of a camera and laser radar to find objects in front of the car. The technology warns the driver to brake with an auditory and visual alarm when it decides there is a chance of a collision. The device applies more braking pressure if the driver detects the hazard and brakes.
What does Lexus Rx350 PCS stand for?
20162022 Lexus RX (RX 350L, RX 450h) PCS Owners Manual (Pre-Collision System) 20162022 Lexus RX (RX 350L, RX 450h) Driving, Using Driving Support Systems, and Owners Manual (Pre-Collision System)
How is a pre-collision system failure fixed?
You can take a few steps to reset your pre-collision system if it’s not working properly.
- If the issue continues, take your automobile to a mechanic or dealer to get it examined.
- Make sure the fuse for the pre-collision system is not blown by first checking the fuse box. Replace it with a new one if it is.
- The battery should then be disconnected and then reconnected. All of your car’s electronic systems, including the pre-collision system, will be reset by doing this.
What does a Lexus PCS alert light mean?
If a buzzer is heard along with the pre-collision system warning light, a fault is present; you should visit a Lexus dealer right once. If there is no buzzer, the PCS is simply momentarily unavailable, and you should follow the directions on the multi-informational display.
How can I reactivate my Lexus Pre-Collision?
On a Lexus car, there is no procedure to reset the PCS warning light. This is a safety measure that prevents you from operating the car while it is damaged. The first thing you should try to do if your light is on when it shouldn’t be is disconnect the battery for 10 minutes so that it can reset.
How come the PCS light is on?
Warning signal/information: A fault in the pre-collision system is indicated by the Pre-Collision System warning light. Even when there is no problem with the system, the warning light will work as follows: When the system is in use, the light will flash rapidly. the Pre-Collision System is engaged, the light will illuminate.
In a hybrid automobile, what is PCS?
You may have read about the Toyota Pre-Collision System (PCS) while investigating the new Toyota lineup and been curious about how it functions as well as its additional benefits. Multiple levels of this cutting-edge technology are available when the system suspects a collision will take place.
Is Lexus equipped with automatic braking?
Your car is built to employ Brake Assist to apply the brakes for you if it senses that a frontal collision is likely. In some circumstances, Brake Assist will stop your Lexus for you on its own.
The pre-collision assist sensor is where, exactly?
Behind the internal mirror is where the camera is positioned. Behind the front grille, below the license plate, is the radar sensor.
Why is the warning light for a forward collision on?
When equipped, the service forward collision warning (FCW) light This light suggests that there might be a problem with the FCW system. For further details, see “Adaptive Cruise Control (ACC)If Equipped under “Starting And Operating.
What does pre-collision system mean?
This technology use radar to identify potential collisions and slow down the car in order to prevent or mitigate the effects of a collision. This technology will not only warn the driver to brake, but it will also provide braking power once the brakes are applied.