You might not be aware with the Maintenance Required light on the Lexus dashboard, which is a relatively new icon. In reality, it is a driver-reminder light that turns on automatically between 3,500 and 5,000 miles after your last service date. It doesn’t imply that your Lexus is in need of repair.
In This Article...
How is the maintenance needed light reset?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why has my Lexus’ maintenance light come on following an oil change?
What does the maintenance needed light on a Lexus mean? When the Lexus Maintenance Required light on your dashboard illuminates, it indicates that your car needs an oil change, a tire rotation, or other type of standard maintenance. Depending on your Lexus model, this typically happens every 3,500 to 5,000 kilometers.
Why does my maintenance light come on after I change the oil?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you may travel securely on roads and you won’t need to manually count the miles since after 5,000 miles, this light will alert you that it’s time for a fresh oil change.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
On a Lexus, where is the TPMS reset button?
Start the car, then wait for 20 minutes. Consult your handbook if you’re having problems locating the reset button. Typically, it’s under the steering wheel.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Start the engine.
2. On the Remote Touch, press the MENU button. Pick “Setup,” then pick “Vehicle,” and last pick “Maintenance.”
3. Choose the devices that require a reset or that require a servicing interval to be configured.
4. To exit, press MENU.
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.