The lock/unlock method cannot be used when a key is being replaced or when a new spare is being obtained. The new fob will need to be software-programmed instead. Before we begin, let’s take a moment to pause. A new key fob needs to be programmed using specialist tools. You require an OBD2-to-USB cable in particular, and it must support the VIM communication protocol. A functional key remote is also required. The method won’t function without each of these resources. The good thing is that you can always visit a licensed mechanic with the new key. Even if you’ll be compensated for a service, you can rely on it working because they’ll have the necessary tools.
The Toyota TIS Techstream program will first need to be installed on your computer. Technically, you can accomplish this with any Windows machine, but a laptop will make things lot simpler. In the end, a cable will connect the car and the computer directly.
You’re going to use your OBD2 cable to connect the car to the laptop since your software is already installed and operational. You need to push the Engine Start button twice without depressing the gas pedal in order to get the two talking to one another. Without actually starting the engine, this will activate the vehicle’s computer.
You ought to have the option to connect to your car in your TechSTream program. Your car will be automatically detected by the program, and you may use the information that is shown to verify that your connection is strong.
The main menu is now visible on the screen. You should utilize it to access Smart Access. You then choose Utility, followed by Smart Code Registration.
obey the directions displayed on the screen. They will guide you through the registration process for the new fob. Both keys will be required for a number of processes that must be completed before the new fob can be registered and used. You must register each key one at a time if you need to register more than one.
In This Article...
How is a 2007 Lexus key fob programmed?
2. UNLOCK and OPEN the driver-side door. CLOSE the trunk and all other doors.
3. Put the key in the ignition and pull it out twice in the space of five seconds.
4. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
5. Turn the key in the ignition, then take it out.
6. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
7. Place the key in the ignition and keep it there.
8. SLIP the driver-side door shut.
9. Start the ignition and then turn it off.
10. REMOVE the key from ignition.
11. The door locks will now cycle to show that the car has entered programming mode successfully.
12. When programming the first remote, PUSH and HOLD the LOCK and UNLOCK buttons for 1.5 seconds. As soon as you release, push and hold the lock button for two seconds.
13. To verify that the remote was successfully programmed, the door locks will cycle. Repeat steps 12 and 13 if you need to program any additional remotes. If not, move on to step 14.
14. OPEN the door on the driver’s side. The programming is now over.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Was this Knowledgeable? Please spare a second to Like, Follow, and Share on the social networks listed below. People like you aid in getting the word out about us. It is extremely beneficial! Thanks for visiting and sharing with your friends and family!
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
The cost of a brand-new Lexus key fob
Getting a replacement for a vehicle key fob that has broken down can be expensive and time-consuming. If you drive a Lexus or another high-end car, the cost can be higher than you anticipate. Losing your key fob can also be an expensive mistake, but with enough preparation and information, none of these situations needs to be a major source of anxiety for you.
Start by examining the battery and button functionality of the key fob before considering replacement. If you’ve had your automobile for a while, a dead battery might only need to be replaced. Additionally, the buttons may become stuck or cease to operate due to normal wear and use. The simplest form of replacement is this one. The “guts” of your key fob can be swapped out for a newer model for less than $50 if you buy a replacement key fob shell from one of the many online retailers. Install a new battery at the same time; it will only cost you roughly $6. You can use your updated fob immediately.
If you believe the problem with your fob extends beyond normal wear and tear, you should contact your local Lexus dealer or a locksmith that is certified to provide new key and fob services. Both options need you to have your identification, vehicle registration, ownership documentation, and VIN on hand. Getting a full key fob replacement is just the start because luxury car brands are so technologically advanced. To program your fob and make sure it functions exactly as well as the original, you also need the correct help. The about $375 cost of each replacement key fob may be paid if you go via a dealership and your car is still covered by warranty. Consider hiring a locksmith if you’ve lost your key and are locked out. You can take advantage of their emergency service hours and the price may be slightly less than a dealership. Your insurer or a roadside assistance provider may be able to compensate you for their services.
How is a key reprogrammed?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- To program the key, turn it back to the on position.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Thirdly, repeat the procedure.
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- In order to test your new key, start the engine.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
Can you reconfigure a key fob?
I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:
- Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
- After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
- While simultaneously using the remote and your hand to unlock the door, turn the key to the ON position.
- In the OFF position, turn the key.
- Locking the door simultaneously with your hand and the remote requires turning the key to the ON position.
- Remove the ignition switch’s key.
- Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
- the driver door with the key.
- The key fob’s battery should be removed and then replaced (unless you put in a new battery)
- Put the key in the ignition switch and attempt to start the engine if the doors will lock.
- Turn the key to the ON position after inserting it into the ignition.
After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.
How can I reset my Lexus now that the battery has been changed?
Just adhere to these simple instructions to reset your car: Take two to three minutes to unplug the battery cable. Start the vehicle after reconnecting the battery. To allow the engine control systems to detect any potential issues, drive the automobile for at least 10 kilometers.
How is a key fob for a 2008 Lexus RX350 programmed?
- These instructions will only function if you already have a MASTER key; if you only have a grey valet key, you must get this key made and programmed at the dealer.
- Before programming, the key must be laser cut by a certified auto locksmith or dealer.
- Pressing and holding the panic and trunk features down for three seconds is necessary for them to work.
- Before beginning, kindly familiarize yourself with the process.
Programming of keys 1. Turn on the ignition with a master key that has already been programmed. Never turn. 2. Five times on and off the gas pedal. 3. Six times, depress and then release the brake pedal. 4. Take out the ignition key. 5. Turn on the ignition with the new key you want to program. 6. Depress the gas pedal once and then release it. Wait one minute. For the next minute, the security light will be blinking. Your key is programmed when it stops blinking. Step on the brake once to stop the programming.
Look for your security light, please. You will be guided by this light as you complete the programming process. At Step 1, the security light will turn on. It won’t turn on again until Step 6. After Step 6, the security light will turn on and begin blinking until the key is programmed. After Step 4, STOP the process and REPEAT it if the security light illuminates.
Your car won’t enter programming mode if you carry out this operation too slowly. Make sure you are using a master key and not a valet key if you are having trouble getting your automobile to enter programming mode. You will probably need to complete this process more rapidly if you have a master key.
Programming remotely:
1. Start by turning off the ignition.
12. On the first remote, press and hold the LOCK and UNLOCK buttons for 1.5 seconds.
programmed. As soon as you release, push and hold the lock button for two seconds.
13. To verify that the remote was successfully programmed, the door locks will cycle. If you do, please
additional remote controls to set up If there are no more remote controls, repeat step 12 before moving on to step 14.