When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before turning off automatically. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
In This Article...
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are confident that everything is installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.
Should the airbag light remain on?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it continues to flash inside your car.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
What could turn on the airbag light?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
Will the airbag light turn on if a fuse blows?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
The airbag sensor is where?
Two airbag sensors are often found at the front of your car, just behind the bumper. Inside of your car’s doors are frequently installed airbag sensors.
Since there are typically multiple distinct airbag sensors installed in a car, you must choose which one you are looking for in order to locate it precisely.
The service handbook supplied by your manufacturer is the best resource for locating the airbag sensor’s placement in your car.
Is there a fuse in the airbag?
Your car’s airbag most likely has a fuse, however the fuse does not turn on the air bags. Your complete system will also be inoperable if your service airbag lights are on.
Can a car be driven with the airbag light on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
Does insurance provide replacement airbags?
Yes, the majority of policies will cover replacing your airbags if the other driver was at fault in the crash (in which case the at-fault driver’s liability insurance would cover it) or if you have collision insurance, which will cover damage to your car regardless of who was at blame.
However, certain vehicles with low cash values will be deemed a total loss by the driver’s insurance carrier if the airbags deploy due to the expensive cost of replacing airbags and installation charges (added to whatever other damage takes place). This implies that rather than paying for repairs, your insurance provider can decide to declare your car a total loss. Because of this, a driver may think of paying for airbag replacement and other repairs on their own, without contacting their auto insurer.
What location does the airbag module have?
A mechanism that manages the airbag system is known as an airbag control module. A car has a number of airbags, some of which are at the front, on the sides, or knee-level to the occupants. A automobile only has one SRS airbag module unit, though. Depending on the make and model of the car, the airbag module can be found in different places. It may be found in the center console, kick panel, under the radio, or behind the steering wheel in some automobiles. However, it is typically located underneath the driver’s or front passenger’s seat. Instead of airbag control modules, heavy-duty vehicles like buses and trucks utilize engine control modules. On the front passenger side of the car, these devices are frequently found beneath the glove box on the instrument panel.
It is impossible to overstate the significance of an airbag module. It enables the full airbag system to function. When there is a sudden halt or accident, the airbag module collects data from the impact sensor and sends a signal to the airbags to deploy. The airbags of a car wouldn’t even inflate without a working airbag module. The airbag sensor is locked following airbag deployment and remains so until it is changed or entirely reprogrammed.
After a collision, the rigid codes and crash data saved in the airbag module can be quite helpful and are typically admissible in court. This compact device stores data on seat belt use, engine and vehicle speed, throttle position, impact speed change, airbag deployments, and seat belt pre-tensioner deployments. More helpful than other physical evidence or verbal explanations, the information from the airbag module is frequently examined by those who study auto accidents.
What is the cost of replacing a passenger airbag sensor?
Best in Automotive Repair Replacement air bag crash sensors typically cost between $393 and $411. The cost of labor is expected to be between $66 and $83 while the cost of the parts is $327. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account.
What happens if the airbag fuse is pulled?
The system will be totally drained. Yes, I’m not joking. Fuse removal alone won’t completely shut off the system because there are still substantial capacitors to take into account.