The tire sizes for the 2020 Volkswagen Passat are P235/40HR19, P215/55HR17, and P235/45HR18. This is what? The wheel (rim) sizes for the 2020 Volkswagen Passat are 19 x 8, 17 x 7, and 18 x 8. The tire specs for each 2020 trim are listed in the table below.
In This Article...
What is the Volkswagen Passat’s lug pattern?
The bolt pattern on the 2017 Volkswagen Passat 1.8T is 5-112 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 112 mm, or 4.4 inches.
Which alternative automobile wheels will fit your car?
You should choose a replacement for your car with the utmost care because rims are crucial to vehicles. It would look out of place and interfere with your drive if you made the wrong choice.
Usually, you are able to swap your wheel for one from another car. The size (diameter and width), center bore, offset, and bolt pattern of the corresponding rims are some of the variables that affect this. Both sides ought to have similar characteristics overall.
Which rims can be swapped out?
You’ll notice that the wheels on various automobiles appear to be very similar when you look at them. Naturally, they have various designs, which is one of the reasons you’re giving your car a makeover.
Wheel aftermarket businesses and automakers create wheels to fit a variety of vehicle requirements and attributes. Not all vehicles can fit the same wheel. They instead have a collection of automobiles that fit. These are the things to think about:
Size of the tire
The size of your tire has a significant impact on the appearance of your car. Determine the size of the tire before replacing the rim. The new tire should have the same old tire’s diameter and width. The speedometer or odometer of the car will be impacted by using the incorrect diameter and width.
Bolt pattern
This is a crucial issue to take into account. When replacing a wheel, pay attention to the bolt pattern. You won’t get the desired makeover if your bolt pattern is incorrect. To get a great look, you must take this into consideration.
Size of the rim
Another thing to think about is the rim’s size. The rim and the new tire have to be an exact match. It can be difficult to understand the large tire and rim at times. To reduce stress if you can’t figure it out quickly, look at the rim compatibility chart.
You might now be asking if you can change the rim size on your car. The rims of a car have a specific size, but you can choose a different tire that will fit on those rims. This means that as long as the rim is sizable, several tire sizes can be mounted on it.
The Wheel offset
The space or separation between the hub mounting surface and the centerline of the wheel is known as the wheel offset. There are several types of wheel offsets, and they are all measured in meters. These consist of;
- Zero offsets: When there is no offset, the mounting surface of the hub is parallel to the centerline of the wheel.
- Positive offset occurs when the hub mounting surface is further displaced from the wheel’s centerline.
- The hub mounting surface faces the brake or rear wheel centerline when the offset is negative.
Although I advise taking these things into account, if you decide to neglect any of them, pay attention to the wheel offset.
How Can I Determine The Right Wheels For My Vehicle?
Given that I’ve listed a number of things to take into account when selecting a rim for your car, determining which rims match your tires should be rather simple. There are two possibilities available when looking for the ideal car rims.
Finding the sticker plate is the second way, while the first involves measuring the rim. If you want to install a larger rim, use the first approach. Choose the second option with the sticker label on the inside of the driver’s door if you wish to install a standard rim size.
Determine the bolt patterns
The first step is to count the number of nut gaps on the wheels by looking at them. Measure the distance between the two wheels that are facing one another using a tape measure.
Determine the offset of the wheel
Verify that the wheel is not in contact with the suspension parts or the brakes. Make sure it doesn’t protrude too far from the vehicle’s body. Ask a local dealership for assistance if you don’t feel confident measuring the rim or inspecting the sticker.
What Are The Effects Of Using A Wrong Wheel Size?
By mounting a tire that is too large, you run the risk of your car rolling over, which is disastrous. The wheel well or parts of the suspension system may be rubbed by tires that are too large. Please understand that while the rubbing may not be an issue at first, it can eventually cause steering problems.
Oversized tires also cause the bumper to rise. If the car is struck from behind in a collision, the lift may not even be noticed but could have a significant impact on safety.
If the wrong tire type is installed on a car, tire width can cause problems. Thin tires may not be able to support the weight of the car for a lengthy period of time because the entire weight is supported by them.
A vehicle’s improper set of wheels will exacerbate other underlying drivability difficulties in snowy, icy, and wet weather conditions.
The biggest concern for drivers is uneven and outer tire deterioration that could result in a blowout. However, even a brand-new set of incorrect tires might result in steering and handling problems, which may result in an accident.
You feel confident in the wheel when the tires are the proper size. The improper tire size might cause a car to stop abruptly or more slowly than anticipated when applying the brakes. Both scenarios have the potential to result in an accident.
You need your braking and steering systems to function in case you see a person abruptly cross the street or the automobile in front of you suddenly stops. You run the risk of being involved in a serious accident if the steering or braking systems are affected by the wrong pair of tires.
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
What automobiles have a 5×112 bolt pattern?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley, and Borgward all have the 5×112 bolt pattern. The following is a complete list of car makes and models:
A 5×100 can it fit a 5×112?
No, there isn’t. You could get a spacer set with rims that have a 5×112 mounting pattern and a hub mounting pattern of 5×100 if the offset is small enough to allow you to use spacers. Works poorly with the original offset since the spacer will force the rim too far out.
What is the 2013 Volkswagen Passat’s bolt pattern?
The bolt pattern on the 2013 Volkswagen Passat 2.5L SE is 5-112 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 112 mm, or 4.4 inches.
Do all automobiles fit on five-lug universal rims?
The answer is no, a universal wheel does not exist. What wheels can go on your car depends on a variety of things.
Width and Diameter The wheel’s diameter and width are two of the most important variables. Every car will have a variety of wheel diameter sizes that will snugly and properly fit, ranging in size from several inches. Typically, this happens as a result of automobiles having multiple sizes and wheel selections for each trim level (i.e. base modelpremium luxury model). This gives the consumer the choice to select wheels based on their aesthetics and functionality.
Both the diameter and width of the wheel are expressed in inches. The rim width is the distance between the edges of one bead seat and the other bead seat, whereas the wheel diameter is the height of the wheel across the center.
Offset The offset of a wheel is the separation between its centerline and its mounting surface. It is expressed in millimeters and can either be positive or negative depending on how far the mounting surface is from the center line. When the mounting surface is in front of the wheel centerline, the offset is positive; when it is behind the wheel centerline, the offset is negative.
This is crucial since you have to stay inside your car’s specified offset range. The wheel may not provide enough space for the wheel hub and brakes to operate properly if the alteration is too radical. The turning radius of your car may be affected by an incorrectly offset wheel, and the wheel may rub against the wheel well.
The diameter of the circle that goes through the center of all the studs, wheel bolts, or wheel rim holes is known as the Pitch Circle Diameter (PCD). You won’t be able to put the wheels on your car without additional parts or a new wheel hub if the PCD of the wheel you want to buy does not match the PCD of your wheel hub.
Two Drilled Wheels Dual-drilled wheels are not universal, despite what some people may believe. Don’t be duped by salespeople or marketing; a ten-lug wheel won’t fit any car with five lugs. Dual drilled wheels are those with two PCDs or bolt patterns.
For instance, a dual-drilled wheel with the bolt patterns 5115 and 5120 will only fit on cars with those specific bolt patterns. Other bolt patterns will not accommodate these wheels.
What automobiles include a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.