There could be a number of causes if the MMI screen in your Audi is not functioning. The fuse box in the passenger compartment should be checked first in order to correctly diagnose the problem. To locate the fuse that powers the display, consult your owners manual’s fuse box diagram. Remove it from the slot, then hold it up to the light. The two pins are connected by a metal bar within. If it’s in good condition, you’ll be able to see the entire bar; if it’s damaged, you’ll need to replace it. Make sure to install a fuse with the same amperage rating and the same style. A fire might start if a fuse with a greater amperage rating is used.
This just restarted my 2021 A3 screen. Press and hold the on button near to the gear stick for 10 seconds.
You can try doing a hard reset by hitting “setup,” the joystick, and the upper right button simultaneously to restart the system if your Audi mmi screen is not functioning.
In This Article...
Why won’t my Audi’s screen work?
This typically occurs when there are too many activities occurring simultaneously in the system. If this happens, you can try doing a hard reset by simultaneously pressing “setup,” the joystick, and the upper right button to restart the computer. Reset the mmi module (Figure 1).
Why isn’t the multimedia in my Audi working?
First, examine the fuse. If your MMI doesn’t even turn on, it’s most likely not getting power. The compartment in the left side of your trunk houses the fuses that regulate a number of the MMI modules. Examine the fuses by prying open the side panel in the trunk.
Why won’t my Audi multimedia work?
Step 1: Verify the fuse. Your MMI is probably not getting electricity if it doesn’t even turn on at all. Several of the MMI modules are controlled by fuses that are housed in a compartment on the left side of your trunk. Look inside the trunk at the fuses by prying open the side panel.
- In the MMI, scroll to the Settings option and click it. Select “Factory settings” from the list of options by scrolling down.
- To reset everything, select “Select all entries,” or pick and choose the specific choices you desire.
- Go to the list’s bottom and choose “Restore factory settings.”
How can I restart my MMI in an Audi 2021?
You have probably already watched the video I made showing how to reset the Audi, and you are probably reading this to gain more knowledge.
- Push the start/stop engine button to start the car.
- the volume control, then move your hand to the right.
- and depress on it (the volume control)
- Aim to hold it for 15 seconds (seems like eons)
- then the message on the screen will vanish and then come back.
- The reboot is finished.
Hopefully, all of your app readouts and instructions for the drive modes, radio, garage, etc. are displayed on your screen.
Why does the MMI in my Audi continually shutting off?
I’m here. Your vehicle’s Multi Media Interface (MMI) may have a problem if an internal button is pushed, causing the system to malfunction. The system will shut down to prevent any damage if a button is locked down even while none of the buttons are pushed. You could attempt to disconnect and reconnect the battery cables. By doing this, you can restore the MMI system to its factory settings and reset all of its parameters and features. I advise contacting a specialist, like one from Your Mechanic, if you are still having issues with your MMI system.
Audi’s MMI has a touch screen?
Audi gives you a streamlined interface that is powered by your touch and lets you manage almost every aspect of your driving experience. a touch interface you’re used to. Simple and well-known concepts are the finest. To operate the infotainment system and climate controls, use the same gestures you would on your smartphone: swiping, pinching, tapping, and writing.
How can my Audi Connect be reset?
Audi’s connected car WiFi: Factory Reset
- Select “Menu” from the head unit of the car.
- A setting.
- Upkeep of the system.
- restore the factory defaults.
- Pick to confirm. restore the factory defaults.
What does an Audi’s MMI do?
You will have fewer control buttons to press thanks to the Audi MMI (Multi Media Interface) system, which streamlines audio, vehicle settings, and navigation controls into a single interface. Additionally Bluetooth-enabled for audio and mobile devices, Audi models provide you hands-free access to many features.
The material in Audi owner’s manuals must be used in conjunction with the information from tutorials. For complete details, consult your owner’s handbook. By using this website for information, you acknowledge that your owner’s manual is the primary source for details on your Audi as well as safety precautions.
How can I exit safe mode on my Audi radio?
Concert Radio by Audi
- The radio is on and plays “SAFE setting
- Press and hold the FM 2 and RDS buttons simultaneously until “1000 flashes.
- To enter the radio code, press any one of the station buttons 1 through 4.
How can I reset my MMI on my Audi A3?
A3 Audi model, 2014 System restart for the MMI (Reset) Press and hold the MENU button, the rotary pushbutton, and the top right control button simultaneously in Fig. 1 for a brief period of time before releasing the buttons.