Audi Pre Sense Rear can start taking preventive action when a rear-end collision is detected using radar sensors in the rear bumper. This technology assists, among other things, by pretensioning the front safety belts and automatically repositioning the seats of the occupants.
In This Article...
What exactly is an Audi pre sense issue?
Pre-sense Fault Indicators for Audi Start with a car wash because either one could indicate a fault that has to be repaired or something as simple as a dirty sensor. The error won’t interfere with typical driving operations.
How do I reset the pre-sense light on my Audi?
If you want to be thorough, you can try to reset the MMI by simultaneously moving the NAV and MEDIA toggles while pressing and holding the MMI ****’s center for for 3 seconds. Your MMI will restart and reset as a result.
Are you able to disable Audi pre sense?
On the infotainment system, pick one of the following: Driver assistance > Left control button > Audi pre sense > MENU button. System – It is possible to turn on or off the pre sense features.
Does the Audi pre sense car stop?
At 52 mph, it can detect turning, stationary, and pedestrians, and it can alert drivers to impending crashes. At speeds under 25 mph, Audi Pre Sense City can also start emergency braking and even assist the car in coming to a complete stop.
What is the front Audi presence?
Audi pre sense systems use cameras and radar sensors to monitor potential hazards surrounding the car. When a collision is about to occur, they take the following actions because they are able to identify pedestrians, vehicles, and other possible hazards. To lessen the risk of injury, the front seat belts automatically tighten.
What does “Audi sensor” refer to?
With the addition of rear parking sensors, Audi Pre Sense Rear is essentially Pre Sense Basic. When the car is pulling up too close to something, the parking sensors alert the driver.
These sensors are combined by Audi with self-parking and autonomous braking systems in select vehicles. In this instance, the sensors track activity behind the automobile at any speed as it travels down the road.
Visual and audio alarms advise the driver of the danger if the sensors identify a potential collision with a vehicle coming from behind. Early Sense In accordance with what is now considered normal procedure, the rear tightens the seatbelts, shuts the windows, and flashes the danger lights quickly. If present, the memory seats can be adjusted to offer the occupants of the automobile the highest level of safety.
When did the Audi Pre Sense program begin?
Audi Pre Sense is a set of safety technologies that includes several radar and collision detection technologies and enables your car to carry out autonomous interventions.
Since 2011, Audi automobiles have had Audi Pre Sense. It has played a crucial role in providing autonomous safety features that are faster than humans, enabling your Audi to practically save your automobile from a crash situation. The majority of Audi Pre Sense technologies are often built into the car and do not require manual activation, however some, like Hold Assist, can be stopped manually at your request.
No matter the weather or the state of the roads, you can drive with confidence thanks to Audi Pre Sense. But what does the Audi Pre Sense technology package truly include as standard? Let’s look at it.
What is the basic and rear Audi pre sense?
The Audi pre sense 360 system detects accident risks all around the vehicle and starts particular safety procedures. The following driver assistance systems are included in it:
- Audi front pre sense
- Audi rear pre sense
- Basic Audi pre sense
- Pre-Sense Side for Audi
Audi pre sense basic
As soon as Audi pre sense basic detects a dangerous driving condition, it starts taking preventive safety actions for the passengers. It makes this determination using data from multiple vehicle systems. It steps in, for instance, if the Electronic Stabilization Control (ESC) sensors notice heavy braking or skidding. The driver’s seat belt and the front passenger’s seat belt are then automatically pretensioned to lessen any lateral or forward motion. Both the sliding sunroof and side windows close on their own. The hazard warning lights are also turned on to warn oncoming cars.
Audi pre sense front / Audi pre sense city
Depending on the car model, Audi pre sense front and Audi pre sense city use data from radar sensors and/or the front camera to calculate the likelihood of a collision. It issues warnings of potential collisions and initiates braking at predetermined vehicle speeds, within the constraints of the system. Vehicles are identified up to a speed of 250 km/h (155.3 mph), pedestrians up to a speed of 85 km/h (52.8 mph) or 65 km/h (40.4 mph), depending on the model, and cyclists up to a speed of 85 km/h (52.8 mph), depending on the system.
Based on a multistage warning concept, the system alerts the driver if an accident is about to happen via visual, aural, and tactile signals. If necessary, the system starts a complete brake application to prevent the accident or offers braking assistance to lower the vehicle’s speed. Inhabitants are also protected by measures. The seat is adjusted for maximum comfort, the seat belts are reversibly pretensioned, and the windows and optional panoramic glass sunroof are closed.
Audi pre sense rear
When a rear-end collision is imminent, the Audi pre sense rear system uses radar sensors in the rear bumper to start protective safety measures. These include power-assisted pretensioning of the front seat belts, as well as window and sunroof closure. The device also turns on the hazard warning lights to warn oncoming cars of the serious situation. The rear-end collision alert signal (RECAS), which causes the hazard warning lights to flash often, is activated throughout this operation. With the exception of when towing a trailer, Audi pre sense rear is active in the background throughout the whole driving speed range of the vehicle.
What does an Audi’s triangle with a question mark mean?
Tire Pressure Monitoring System (TPMS): This warning light has the appearance of a flat tire with a capital “E!” in the center. Every Audi comes with a tire pressure monitoring system (TMPS), which turns on when one or more of your tires are considerably underinflated.