Pre Sense Basic, which is included as standard on the majority of Audi vehicles, is what you would consider the entry-level version of the Pre Sense technology.
Pre Sense Basic is a relatively low-tech device that employs sensors to alert the electronic stability control system when the driver slams on the brakes. Electric motors respond by pretensioning or tightening the front seatbelts in anticipation of a potential collision. Basic also closes the windows, switches on the danger lights, and raises the sunroof (if equipped).
Pre Sense in this form does not assist a motorist in avoiding an accident. Instead, it readies the cabin for impact to lessen the likelihood of a major accident.
In This Article...
Are all Audis pre sense-equipped?
The fundamental Audi Pre Sense system (Turn Assist, Lane Assist, Pre Sense 360, etc.) comes standard on all 2020 Audi models, however some of the other features, including Adaptive Cruise Control, are optional upgrades. Please ask a member of your sales team what features come standard on your Audi model and whether there are any available upgrades.
What is the pre sense system in an Audi?
Audi pre sense systems use cameras and radar sensors to monitor potential hazards surrounding the car. When a collision is about to occur, they take the following actions because they are able to identify pedestrians, vehicles, and other possible hazards. To lessen the risk of injury, the front seat belts automatically tighten.
Audi pre sense sensors: where are they?
The Audi pre sense 360 system detects accident risks all around the vehicle and starts particular safety procedures. The following driver assistance systems are included in it:
- Audi front pre sense
- Audi rear pre sense
- Basic Audi pre sense
- Pre-Sense Side for Audi
Audi pre sense basic
As soon as Audi pre sense basic detects a dangerous driving condition, it starts taking preventive safety actions for the passengers. It makes this determination using data from multiple vehicle systems. It steps in, for instance, if the Electronic Stabilization Control (ESC) sensors notice heavy braking or skidding. The driver’s seat belt and the front passenger’s seat belt are then automatically pretensioned to lessen any lateral or forward motion. Both the sliding sunroof and side windows close on their own. The hazard warning lights are also turned on to warn oncoming cars.
Audi pre sense front / Audi pre sense city
Depending on the car model, Audi pre sense front and Audi pre sense city use data from radar sensors and/or the front camera to calculate the likelihood of a collision. It issues warnings of potential collisions and initiates braking at predetermined vehicle speeds, within the constraints of the system. Vehicles are identified up to a speed of 250 km/h (155.3 mph), pedestrians up to a speed of 85 km/h (52.8 mph) or 65 km/h (40.4 mph), depending on the model, and cyclists up to a speed of 85 km/h (52.8 mph), depending on the system.
Based on a multistage warning concept, the system alerts the driver if an accident is about to happen via visual, aural, and tactile signals. If necessary, the system starts a complete brake application to prevent the accident or offers braking assistance to lower the vehicle’s speed. Inhabitants are also protected by measures. The seat is adjusted for maximum comfort, the seat belts are reversibly pretensioned, and the windows and optional panoramic glass sunroof are closed.
Audi pre sense rear
When a rear-end collision is imminent, the Audi pre sense rear system uses radar sensors in the rear bumper to start protective safety measures. These include power-assisted pretensioning of the front seat belts, as well as window and sunroof closure. The device also turns on the hazard warning lights to warn oncoming cars of the serious situation. The rear-end collision alert signal (RECAS), which causes the hazard warning lights to flash often, is activated throughout this operation. With the exception of when towing a trailer, Audi pre sense rear is active in the background throughout the whole driving speed range of the vehicle.
Is side assist from Audi standard?
- Improved standard equipment options for the whole 2022 model line
- Updated technology and driver aid features, like as Adaptive Cruise Assist and Top View Camera System, are now available on even more vehicles.
- Additional digital customizing choices are available, along with several additional cutting-edge technologies.