- Start the car’s engine.
- On the MMI control panel, select the (Car) Systems control button by pressing the car function button.
- Choose Servicing and inspections.
- Select Tire pressure monitoring after that.
- Go to Store tire pressures and click.
- Select Yes, go to the store right away.
In This Article...
How can I add air to my Audi MMI tires?
On the MMI control panel, select the systems control button by pressing the car button. Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
On an Audi, where is the tire pressure?
Scroll down a little on the results page to see the tyre pressure and tyre size information next to the automobile symbol.
Please be aware that several automakers frequently recommend a different tire pressure for specific winter tires.
The tyre pressures shown are merely guidelines. You can find the appropriate tire pressure for your car in the maintenance manual, on a label inside the front dooroften on the passenger sideor even on the gasoline cap.
To determine which MICHELIN tire is perfect for your car, feel free to use our tyre selector or get in touch with a tire dealer.
What does an Audi’s MMI do?
In order to reduce the amount of buttons and provide a more streamlined interior design, the Audi MMI (Multi Media Interface) system was developed. It unifies the controls for audio, vehicle settings, and accessible navigation under a single interface.
Where is the MMI for Audi?
Every new Audi vehicle has some sort of MMI. A display panel installed on the dashboard serves as the brain of the system. In certain designs, like the most recent Audi Q3 Sportback (above), it is built into the dashboard. Others feature a freestanding screen on top of the dash, such the A4 (seen below).
You can use the screen as a standard touchscreen, exactly like your phone, regardless of where it is located. Since not all Audi vehicles previously had touchscreen capabilities, Audi installed a rotary scroll wheel to the center console that could be used to browse the system’s menus. Currently, that is being phased out and is being replaced by a touchpad similar to a laptop, as seen in the Audi Q5 below.
With your index finger, you may write the letters of an address into the sat-nav as well as swipe through options. The touchpad may be challenging for right-handed drivers to use because it is situated to the driver’s left, but Audi’s technology is excellent at reading letters no matter how scribbled or distorted they may be.
Audi refers to the digital instrument display included with MMI as the “Virtual Cockpit.” Simply put, it is an additional high-definition digital screen that takes the place of the traditional analogue dials in front of the steering wheel.
Using buttons on the steering wheel, you may set this up to display a variety of driving information and satellite navigation directions.
Mercedes and BMW both offer comparable systems. Audi and BMW both have displays that resemble classic instrument binnacles, while Mercedes chose a single square widescreen design that hooks up with the center touchscreen, similar to the one in the Mercedes GLA shown above.
How can a TPMS light be turned off?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.