- Start the car’s engine.
- On the MMI control panel, select the (Car) Systems control button by pressing the car function button.
- Choose Servicing and inspections.
- Select Tire pressure monitoring after that.
- Go to Store tire pressures and click.
- Select Yes, go to the store right away.
In This Article...
How can the TPMS on a 2019 Audi A4 be reset?
How to Reset Your Audi’s TPMS
- The engine need not be running; just make sure the car is turned on.
- On the MMI control panel, select the systems control button by pressing the car button.
- Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
My TPMS light won’t turn off; why?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one tire on your vehicle may not be inflated to the appropriate level by at least 25%.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
How much pressure should an Audi A4 tire be?
The Audi A4 uses robust 225/55 R16 tubeless radial tires, and the recommended air pressure for these tires is 30 to 32 PSI. Better fuel economy can be had with 32 PSI, but a smoother, more comfortable ride can be had with 30 PSI.
How is the TPMS manually reset?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
Why are the tires fine but the TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
What does my Audi’s TPMS stand for?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, reduced fuel efficiency, excessive heat buildup, and tire overload. Both sides of the tread edges or shoulders will prematurely wear out on a tire that is underinflated.
Finding the TPMS indicator on your dashboard is easy if you’re just learning about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
Can the TPMS system be turned off?
On the gauge cluster of your car’s dashboard, a horseshoe-shaped emblem with an exclamation point lights when your tire is underinflated. The tire pressure monitoring system is the piece of equipment that generates this signal (TPMS).
Sensors provide the TPMS with data on the air pressure level. The air pressure sensors inside your tires or the anti-lock brake system’s wheel speed sensors may be used by your car’s TPMS, depending on the model.
Is driving permitted while the tire pressure light is on?
You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.