The FIX: Step-by-Step for the Forced Reboot of the Audi MMI (reset)
- Push the start/stop engine button to start the car.
- Next, move your hand to the right to adjust the volume.
- and depress on it (the volume control)
- Aim to hold it for 15 seconds (seems like eons)
In This Article...
Why won’t my Audi MMI work?
If your MMI doesn’t even turn on, it’s most likely not getting power. The compartment in the left side of your trunk houses the fuses that regulate a number of the MMI modules. Examine the fuses by prying open the side panel in the trunk.
How can my Audi MMI be updated?
Put the SD card in slot 1 and access the Engineering Menu in your MMI by selecting the “Update” option. Select SD1 as the source, then choose the firmware and “Standard” on the following page. Depending on the file size, the MMI update should take between 30 and 60 minutes to complete.
How can I reset my MMI on my Audi A3?
A3 Audi model, 2014 System restart for the MMI (Reset) Press and hold the MENU button, the rotary pushbutton, and the top right control button simultaneously in Fig. 1 for a brief period of time before releasing the buttons.
My MMI is off; why?
I’m here. Your vehicle’s Multi Media Interface (MMI) may have a problem if an internal button is pushed, causing the system to malfunction. The system will shut down to prevent any damage if a button is locked down even while none of the buttons are pushed. You could attempt to disconnect and reconnect the battery cables. By doing this, you can restore the MMI system to its factory settings and reset all of its parameters and features. I advise contacting a specialist, like one from Your Mechanic, if you are still having issues with your MMI system.
Why is my MMI not operating?
Before turning on the MMI system, you must turn on the ignition. The last primary function you selected will now appear in the menu. The most recent audio source will start to play.
Turn off the ignition to turn off the MMI system. Your preferences will be saved.
Press the ON/OFF button (Fig. 1) or one of the function selector buttons (Fig. 2) for a brief period of time to turn on the MMI system.
Press and hold the ON/OFF button until the MMI is turned off to turn off the MMI system.
If the MMI system was manually shut off the previous time it was used, it will not turn on when the ignition is turned on.
After the ignition is turned off, the MMI system continues to function for about 10 minutes. The MMI system will turn off automatically if no function selector, control, or rotary pushbutton on the MMI control console is pressed within this time frame.
- The MMI system will turn off automatically if the engine is off and the battery charge level is low.
- To enable or disable the MUTE function for the selected audio/video source Link, briefly push the ON/OFF button.