It only requires a few minutes of your time to reset the low tire pressure light on Your Audi A4. Get in your automobile and turn the key to the “on” or “run” position as soon as possible. Be careful not to start the engine. Next, press the MMI panel’s automobile function button. then click the box that says “Car Systems Control.” Select Checks, then Servicing. Choose store tire pressures next, then tire pressure monitoring. Finally, select Yes and then “store immediately.” Your tire pressure light should now be completely reset and go gone.
The Audi A4 low tire pressure sensor cannot be reset without the ignition being turned on. On the MMI control panel, select the (Vehicle) system power button by clicking the vehicle feature button. Select Checks and Services. Select Tire Pressure Monitor next. Select “Store tire pressures” from the menu. Select Yes, store this.
In This Article...
On an Audi A4 2020, how do you reset the tire pressure light?
How to Reset Your Audi’s TPMS
- The engine need not be running; just make sure the car is turned on.
- On the MMI control panel, select the systems control button by pressing the car button.
- Choosing Vehicle > Service & Checks Tracking tire pressure > Keeping tire pressure at > Yes, go to the store right away.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
How can I disable the tire pressure indicator?
How to Clear the Tire Pressure Indicator
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service department for qualified help.
My TPMS light won’t turn off; why?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one tire on your vehicle may not be inflated to the appropriate level by at least 25%.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
What tire pressure is recommended for an Audi A4?
The Audi A4 uses robust 225/55 R16 tubeless radial tires, and the recommended air pressure for these tires is 30 to 32 PSI. Better fuel economy can be had with 32 PSI, but a smoother, more comfortable ride can be had with 30 PSI.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Does Audi alert you to a low tire?
Messages of Caution on the Dashboard The TPMS warning, which appears as a yellow warning icon with an exclamation point on your Audi dashboard, may be visible. You might learn that one of the tires’ pressures is low via a text message that appears beneath the icon.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
How to reset your TPMS after tire service can be found in your vehicle’s manual or by asking your neighborhood Midas mechanic.
- Visual inspections of the brakes, battery, air filter, fluids, belts, and hoses are all included in the Midas Touch Courtesy Check.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.