The interior monitor and tow-away protection will be inactive if you now lock the Audi A3 until you unlock it once more.
The ability to unlock the doors from the inside has been lost. As a result, breaking into the Audi A3 is more challenging. WARNING!. The letter Take note of the door safelock. When you turn off the ignition, a warning that the safelock mechanism* will be engaged appears on the instrument cluster display. One of the following methods can be used to disable the safelock mechanism:
Within two seconds, press the remote control key’s button a second time. Or:
Within two seconds, make a second touch to the door handle sensor (applies to Audi A3s with convenience key). Or:
Within two seconds, turn the door lock’s key a second time to the lock position.
If you turn off the safelock mechanism* and then turn a door handle, the alarm will sound. Turn on the ignition or depress the button on the remote control key to turn off the alarm.
If the automobile is locked from the outside and the safelock mechanism* is engaged, never leave anyone inside (particularly children) as the doors and windows cannot be unlocked from the inside. Locked doors could prevent help from arriving in an emergency, possibly endangering lives.
The interior monitor and tow-away protection are immediately disabled if you turn off the safelock mechanism*, and vice versa. This implies that your Audi A3’s theft protection is no longer 100 percent effective.
Only when the windows and sun roof* are shut will the interior monitor and tow-away protection work as designed.
In This Article...
Will my car lock if I don’t sound the alarm?
Close the doors while sitting in the passenger seat, then lock them using the central lock button located next to the gearshift.
You must manually depress the black button on the passenger door before shutting it.
The automobile is now shut and secured without the alarm going off. As stated, this can only be done from the passenger side.
How do I disable myAudi’s interior alarm?
If the sensor notices any movement inside the cabin, the alarm will sound. Alternatively, if the car’s inclination shifts.
Turning off the inside monitor will stop the alert from sounding. Additionally, if you want a car that is entirely silent, you can disable the tow-away protection.
There is also a secret fact. The motion sensor will also turn off the safe lock system if you do so. Therefore, if your safe lock is deactivated, it can be the reason your motion sensor won’t work.
Step 1
Your remote control key’s button with the lock icon should be pressed. After two seconds have passed since the first click, press it once more.
Within two seconds, make a second touch to the door handles’ sensor. Owners who possess convenience keys must follow these instructions.
Within two seconds, turn the mechanical key in the door lock a second time to the closed position.
How can my Audi A3 be locked?
To lock the Audi A3, close the door and briefly contact the sensor on the driver’s door handle while in position P (automatic transmission). WARNING!. Do not grasp the door handle at the same time. Only the front doors and boot lid can lock and unlock the Audi A3.
How can my Audi A1 be locked without an alarm?
The central locking system of the Audi A1 locks both the boot lid and doors. Depending on the option you have chosen on the sound system* or MMI*Link (applies to Audi A1s with driver information system*), the central locking system will either unlock the driver’s door solely or all the locks on the Audi A1.
When the Audi A1 speeds up to roughly 15 km/h, the Auto Lock feature locks the doors and the boot lid.
When the ignition key is taken out, the Audi A1 is once more unlocked. The Audi A1 can also be unlocked by pulling one of the inside door handles or by using the central locking switch. On the sound system* or MMI*Link (applicable to Audi A1s with driver information system*), the Auto Lock function can be turned on and off.
The doors will automatically unlock in the event of an accident when the airbags deploy to make accessing help easier.
The letter Take note of the door safelock. The warning that the deadlock mechanism is automatically engaged when you lock the Audi A1 from the outside can be seen on the instrument display. Then, it is impossible to open the doors from the inside. As a result, breaking into the Audi A1 is more challenging. WARNING!.
Any time you lock the Audi A1, you can manually remove the deadlock mechanism:
- Within two seconds, turn the door lock’s key a second time to the lock position. Or:
- Within two seconds, make a second touch to the sensor* on the door handle (applies to Audi A1s with convenience key).
The driver’s door trim’s top light-emitting LED, which recognises this technique, initially flashes quickly for a brief period of time, then goes dark for around 30 seconds, and then slowly begins to flash once more.
The anti-theft alarm system activates an audible and visual alarm if it detects interference with the Audi A1.
When the Audi A1 is locked, the anti-theft alarm system is automatically activated. If you unlock the Audi A1 with the remote control or the door handle sensor, it turns off immediately (convenience key).
In order to stop the alarm from going off after you unlock the Audi A1 by placing the key in the driver’s door, you should turn on the ignition within 15 seconds. When you open a door, the alarm goes off instantly on some export versions.
Press the button on the remote control key/convenience key or turn the ignition key to turn off the alarm. After a predetermined amount of time, the alert also ends automatically.
If you want to stop the alarm from going off unintentionally Link, turn off the interior monitor and tow-away protection.
When the Audi A1 is unlocked, the turn signals will flash twice; when it is locked, they will only flash once. The boot lid, one of the doors, or the bonnet may still be open if the turn signals do not flash.
In the following circumstances, the central locking mechanism keeps you from being locked out of the Audi A1:
- If you depress the central locking switch and then close the door Link, the Audi A1 won’t lock when the driver’s door is open.
- When the boot lid is closed on an Audi A1 with a convenience key*, the boot lid will automatically open again if the key that was just used is still inside the boot.
Locking the Audi A1 using the remote control key/convenience key should wait until all of the doors and the boot lid have been closed in order to avoid getting locked out.
If the automobile is locked from the outside and the deadlock mechanism* is engaged, never leave anyone inside (particularly children), as the doors and windows cannot be unlocked from the inside. Locked doors could prevent help from arriving in an emergency, possibly endangering lives.
- Never leave any valuables in the Audi A1 while it is moving. A locked Audi A1 is still not safe.
- When the Audi A1 is locked, if the diode on the driver’s window sill illuminates for roughly 30 seconds, the central locking system or anti-theft alarm* is malfunctioning. Please have the fault fixed by an authorized workshop or an Audi dealer.
- Only with the windows and sun roof closed will the inside monitor of the anti-theft alarm* system operate as intended.
How can my Audi A6 be locked without an alarm?
The interior monitor and tow-away protection will be inactive if you now lock the Audi A6 until you unlock it once more.
The ability to unlock the doors from the inside has been lost. As a result, breaking into the Audi A6 is more challenging. WARNING!. The letter Take note of the door safelock. When you turn off the ignition, a warning that the safelock mechanism* will be engaged appears on the instrument cluster display. One of the following methods can be used to disable the safelock mechanism:
Within two seconds, make a second touch to the door handle sensor (applies to Audi A6s with convenience key). Or:
Within two seconds, turn the emergency key in the door lock a second time to the lock position.
The interior monitor and tow-away protection are immediately disabled if you turn off the safelock mechanism*, and vice versa. This implies that your Audi A6’s theft protection is no longer 100 percent effective.
1) Not all export versions and equipment versions support this function.
Why does locking my car set off the alarm?
Rain can leak through the door lock actuator connector due to the way a car’s door lock sensor is built, setting off the alarm. Its interior wiring can also deteriorate and stop working.
Fixing the problem involves finding the leak’s source and sealing the connector with sealing oil. Listen for any buzzing or humming as well, as this can assist determine whether the door lock actuator is operating properly or not.
A scan tool will help identify which car door has been most responsible for your car alarm repeatedly going off in the case of defective wiring. Regardless of the type of door, you should check the door lock connector and actuator to see if any of these components need to be replaced.
How do I turn off my alarm system?
Your home security system can be powered down or turned off by unplugging the transformer from the main outlet after removing the backup battery. Check the touchscreen or keypad of the panel to make sure it is blank to ensure that it has been powered down.
When a person goes to work on their panel, they frequently turn off their security system first. This can entail adding a hardwired siren or setting up a new communications module. They should reconnect the transformer first, then put in the backup battery when they want to turn their system back on.
Follow these instructions to deactivate your home alarm system:
1. Unplug the standby battery. It is advised that you unhook the panel’s transformer before removing the backup battery to prevent electrical issues. Generally speaking, the type of panel will determine where the battery is placed. The backup battery for wireless systems is often hidden under the panel’s back cover. It will be connected to the circuit board of the panel. To detach the battery, merely unplug the link.
For Honeywell Vista Systems that are hardwired, the battery is a sizable black box that is kept inside the panel’s beige metal cabinet. To detach the battery, unplug it from both the positive (+) and negative (-) terminals.
2. Turn the transformer off. A transformer connects each panel’s wall outlet to the panel. The panel cannot be powered off until this transformer is removed. The transformer cannot be unplugged if it is fastened into the outlet; the screw must first be removed. The transformer can then be carefully removed from the wall socket from there. Another choice would be to shut off the break that powers the outlet where the transformer for the panel is connected in.
3. Validate the shutdown. In most situations, you can verify the panel’s display screen or keypad to make sure it has shut down. The system has successfully powered down if the display screen or keypad is blank and does not respond when a button or touchscreen is tapped.
Without a remote, how do you turn off your car alarm?
If the manufacturer installs a car alarm system, your key should also contain a chipped key code that has been programmed to the vehicle so that it will recognize it when you crank the ignition or insert the key into a door.
Simply insert your key into the driver’s-side door lock and turn to silence your car’s alarm. Enter the vehicle and turn the key in the ignition if the alarm still doesn’t go off. The alarm should stop beeping when the car is started. By inserting the key in this way, your vehicle should be able to identify its master’s key and feel at ease knowing everything is in order. It should stop screaming as a result of this.