Your 2012 Audi A3’s first step is to select the TEL button > to connect a phone. Mobile phone connection > Discover new gadgets. On the MMI display, the Bluetooth devices that are available are displayed. Utilize the bluetooth device search feature on your phone to look for the MMI system. From the list of Bluetooth devices displayed, choose and confirm the selected cell phone. Bluetooth technology’s hands-free capacity is fantastic since it contributes to road safety, but there are many more advantages to it than just that. The popular apps you have on your phone can now be accessed through your automobile thanks to bluetooth technology, which is used by both the car and the smartphone. All of these factors combine to make driving a safer environment for everyone.
In This Article...
How can I make a phone connection to my Audi A3?
Android Auto Setup for Audi
- Make sure your mobile device has Bluetooth turned on.
- Turn on your Audi, then put it in PARK.
- Press Phone > Connect Mobile Device on your Audi’s touchscreen.
- On the Audi touchscreen, choose the device you want, and make sure the PINs on both of them match.
I have a 2012 Audi; how can I link my phone?
How to Pair Your Smartphone with Audi MMI Bluetooth in Steps
- Place your Audi A4 in PARK while turning on the ignition.
- On your Apple or Android device, turn on Bluetooth.
- Bluetooth should be in pairing mode.
- On the Audi MMI Display, choose PHONE.
- Choosing CONNECT Mobile Device.
On an Audi A3, how do I activate MMI?
When the ignition is turned on or off, the MMI system is automatically turned on or off. Additionally, it can be manually turned on and off.
- Activating manually: Press the ON/OFF button just a few times in Fig. 1. Alternately, press the MENU button or one of the direct menu access buttons -6-.
The last-selected menu will be shown when the system is turned on, and the most recent audio source will start playing.
- Press and hold the ON/OFF button -5- until the MMI turns off to manually turn it off. If the MMI system was manually shut off the previous time it was used, it will not turn on when the ignition is turned on.
After the ignition is turned off, the MMI system continues to function for about 10 minutes. The MMI system will be turned off automatically if you don’t hit any buttons or the rotary pushbutton on the MMI control panel during that time.
- The MMI system will turn off automatically if the engine is off and the battery charge level is low.
Can my Audi play music over Bluetooth?
Any Bluetooth-enabled device, including Android phones and the iPhone, may stream music via your car using this somewhat more expensive substitute for the standard A2DP adaptor. This makes it quite simple because the majority of Audi infotainment systems include the necessary 30-pin connector, which is found in your glove box.
Has the 2012 Audi A4 Bluetooth audio?
I was surprised to learn that Audi didn’t offer Bluetooth streaming functionality until the 2013 models, and I’m hoping to use an aftermarket product to add A2DP capability to my 2012 model.
How do I link myAudi to myAudi MMI?
Launch your car Select an option by pressing the MMI system’s Menu function button “Open the options menu in the MMI display and select Audi Connect. Choose “Audi connect user management,” “Key user,” and Select “key user setting precisely as it appears in the registration email for your myAudi account. NOTE:
Where is the MMI for Audi?
Every new Audi vehicle has some sort of MMI. A display panel installed on the dashboard serves as the brain of the system. In certain designs, like the most recent Audi Q3 Sportback (above), it is built into the dashboard. Others feature a freestanding screen on top of the dash, such the A4 (seen below).
You can use the screen as a standard touchscreen, exactly like your phone, regardless of where it is located. Since not all Audi vehicles previously had touchscreen capabilities, Audi installed a rotary scroll wheel to the center console that could be used to browse the system’s menus. Currently, that is being phased out and is being replaced by a touchpad similar to a laptop, as seen in the Audi Q5 below.
With your index finger, you may write the letters of an address into the sat-nav as well as swipe through options. The touchpad may be challenging for right-handed drivers to use because it is situated to the driver’s left, but Audi’s technology is excellent at reading letters no matter how scribbled or distorted they may be.
Audi refers to the digital instrument display included with MMI as the “Virtual Cockpit.” Simply put, it is an additional high-definition digital screen that takes the place of the traditional analogue dials in front of the steering wheel.
Using buttons on the steering wheel, you may set this up to display a variety of driving information and satellite navigation directions.
Mercedes and BMW both offer comparable systems. Audi and BMW both have displays that resemble classic instrument binnacles, while Mercedes chose a single square widescreen design that hooks up with the center touchscreen, similar to the one in the Mercedes GLA shown above.
How can I use my Audi A3’s Bluetooth to play music?
Through the MMI, you can wirelessly stream music from your smartphone using the Bluetooth audio player.
Important: The Audi A3 must be stationary, and both the Audio playerLink feature of the MMI system and the Bluetooth function of your portable player must be turned on.
the MEDIA button, then the control button. Bluetooth audio player as the source new Bluetooth audio player connected. The available Bluetooth audio players will be shown.
Choose an audio player and confirm it. To establish the connection, the MMI will produce a PIN.
To establish a connection on your mobile device, enter the PIN. Alternatively, confirm the PIN on the phone and in the MMI if it is already visible. About 30 seconds are given for you to enter the PIN.
The media are initiated and controlled either by the portable player or the MMI system Link, depending on the device you’re using.
- Any connection inquiries on your Bluetooth audio player should be paid attention to.
- Devices connected through Bluetooth only need to link once. When they are in range, Bluetooth devices that have previously been bonded to the MMI system are immediately connected.
- Multiple Bluetooth audio players can be bound to the MMI system, however only one connection can be active at once.
- The Bluetooth protocols AVRCP (1.0/1.3) and A2DP are supported by the system.
- Please remember to adjust your portable audio player’s volume control to its highest setting, as advised by Audi.
- The Bluetooth audio player you are using will determine whether media features are supported.
How do I locate my Audi PIN?
In the app, go to the Profile tab >> User management >> PIN to modify the four-digit remote services PIN that you use to remotely lock and unlock your car. You will have to enter your vehicle’s Key User credentials again if you reset your PIN.
Until you log into the MMI of the vehicle to connect your myAudi PIN, your eight-digit myAudi PIN will be shown on the Vehicle page of the app. After pairing, iOS users can still locate their PIN in the Vehicle Connections area of the app’s Profile tab. This feature will soon be available for Android.
How do I turn on MMI in an Audi?
Before turning on the MMI system, you must turn on the ignition. The last primary function you selected will now appear in the menu. The most recent audio source will start to play.
Turn off the ignition to turn off the MMI system. Your preferences will be saved.
Press the ON/OFF button (Fig. 1) or one of the function selector buttons (Fig. 2) for a brief period of time to turn on the MMI system.
Press and hold the ON/OFF button until the MMI is turned off to turn off the MMI system.
If the MMI system was manually shut off the previous time it was used, it will not turn on when the ignition is turned on.
After the ignition is turned off, the MMI system continues to function for about 10 minutes. The MMI system will turn off automatically if no function selector, control, or rotary pushbutton on the MMI control console is pressed within this time frame.
- To enable or disable the MUTE function for the selected audio/video source Link, briefly push the ON/OFF button.