When the wipers are halfway down your windshield, switch them ON before turning them off on your Audi A3.
In This Article...
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers on your 2016 Audi A3 are operated by a “Narrow” 19mm Push Button attachment. Click the button or tab. Slide the old wiper off after that.
Various wiper manufacturers employ various push button attachment styles.
Connect the new Trico Tech Beam Blade wipers
When using this arm type, the preattached adaptor on the wiper blade must be removed and replaced as shown with the adapter (BC)
1. Move the tiny adapter lever in the direction of the blade’s center.
2. As you complete step 1, remove the factory-installed adaptor from the blade and throw it away.
3. Locate the BC adaptor and place it in the blade’s middle. the two protrusions inside the adaptor onto the “X”-marked region of the blade.
4. Push the tab on the adaptor’s front (B).
5. Remove shim (C) from adaptor (B) and throw it away. Tip: To remove shim (C) more easily, press down on the top edge of adaptor B.
6. Connect the tabs on the adaptor’s back end.
7. Draw the blade into the arm’s underside.
8. The hole on the top of the arm must lock the button on the adaptor’s top into place.
How do you replace the wiper blades on an Audi Q3 from 2016?
When the wipers are halfway down your windshield, turn on your wipers before turning off your Audi Q3.
The windshield wipers on your 2016 Audi Q3 are operated by a “Narrow” 19mm Push Button attachment. Click the button or tab. Slide the old wiper off after that.