The high-tech engine in the Audi A4 requires frequent oil changes since it is precise and sophisticated, and it will not run on old or unclean oil. Although the engine is complex, changing the oil is an excellent DIY project for the home mechanic to save money (oil changes are a significant source of revenue for the average service center) and will give you the confidence to take on more maintenance tasks, such as, perhaps, a full service. The best recommendation is to get a workshop manual and adhere strictly to the instructions, but in general, you must drain the old oil, change the oil filter, replenish the oil, and dispose of the old oil in an environmentally responsible manner (many councils operate oil recycling stations). The Audi is a complicated machine with many parts jostling for space, so it’s probably not a job for the utterly inexperienced. Despite this, it’s not a difficult job for a mechanic.
Before ever grabbing a spanner, there are a few things you need to understand. These include the kind of Audi A4 oil you require, the parameters for the oil filter replacement process, and how frequently to change the oil (often referred to as the oil-change interval). Additionally, you must be certain of the exact year of your car because Audi changed its standards over time. For instance, the specs of a 2007 Audi A4 may differ from those of a 2010 or 2013 model. When buying the oil and new filter, be very particular because even a 2011 and a 2012 Audi A4 had variances under the hood. Don’t forget that the A4 has also extensively employed 1.8 and 2.0 size engines, as well as a diesel alternative, which has its own unique servicing requirements. Once more, your buddies are the workshop manual and the parts interpreter at the store where you buy your oil and filter. Knowing the VIN of your automobile can also be very helpful in determining the precise parts you require.
For both gasoline and diesel engines in the Audi A4, a fully synthetic 5W30 oil is the recommended choice. For a diesel oil change, you’ll need five liters, and for an A4 petrol engine, you’ll need 5.2 liters. For the petrol engine and the turbo-diesel, the proper replacement oil filters are the Ryco (or comparable) R2748K and R2740P, respectively.
In This Article...
A4 Audi’s oil consumption is how much?
All TEMPS….5W-40, 5W-30, 0W-40, 0W-30 – Use a viscosity grade appropriate for the climate, season, and driving conditions where the vehicle is used if synthetic oil that satisfies the applicable Audi, Volkswagen oil quality standard with the recommended viscosity grade is not readily available in your area. Verify that the oil satisfies the requirements for Audi and Volkswagen.
Step 4
To let the pressure in the crankcase escape, open the bonnet and remove the oil cap. Make sure your car is off before removing the oil cover, which should be obvious. If the hole into the crankcase is unclean, remove the cap and carefully clean the area. Take care to prevent any dirt or debris from falling in.
Step 5
Under the automobile, climb. A piece of cardboard should be placed beneath the oil pan if you have never changed your own oil before. Grab a 19mm socket and ratchet. The drain plug is located on the car’s passenger side. As soon as the socket is firmly in place, gradually apply pressure until the initial bond snaps. You should be able to unscrew the bolt by hand for the most part (be careful, the oil pan is probably still very warm).
Step 6
Take hold of your drain pan and position it next to the drain plug. Continue to unwind the plug’s screw. Oil will start to leak out, giving you a hint as to where the end is. Let the stopper fall into the drain pan when it eventually releases. Hopefully you’ve caught the initial jet of oil by holding it close to the plug and it hasn’t sprayed all over your driveway. Just observe the direction of the oil flow before lowering the pan to the ground. The flow will drip out as it slows. Allow the oil to drain for ten minutes or so.
Step 7
You need to find the engine oil filter. It is located directly above the motor mount on the car’s driver’s side. When you detach the filter, oil will unavoidably flow out because it is packed with oil. One trick is to place a Ziplock bag over the filter; this should, in principle, capture any extra oil. Take hold of the oil filter, but be carefulit can be hot. Rotate counterclockwise. If you can overcome the first suction with a little push, it should spin off immediately; if not, you may need an oil filter wrench, which are readily available at any car parts store. (Note: I also have big hands and big arms, so I had to unscrew and unclip my coolant expansion tank to obtain better access.) Filter removed, pour the oil into the drain pan along with the remaining used oil.
Step 8
Remove the new filter from its packaging. Reinstall the filter after dabbing some old engine oil on the rubber seal around the top. Give it a slight more twist after hand-tightening it to ensure that it is snug.
Step 9
Put the oil pan’s new oil drain stopper in place. So that you don’t cross-thread it, screw it in by hand. When it’s tight, tighten it to 30 nm with a torque wrench (neuton meters). If a torque wrench is not available, tighten it with a ratchet until you feel resistance, then loosen it by roughly a quarter turn.
Step 10
Oil the engine and add. The 1.8T can hold 4.3 liters of oil (which ends up being about 4.5 quarts for me). Add it gradually through the crankcase hole. If you’re not sure how much to add, err on the side of caution and add less (you can always add more, but it’s difficult to remove oil from the mixture afterwards). Make sure the cap is on tight.
Step 11
Start the vehicle, then look for leaks. Replace the belly pan and place the car back on the ground if there are none. 10 minutes after starting the automobile, check the oil level and make any required adjustments. Put the used engine oil in the designated disposal (I put it in the oil containers that are now empty, a funnel helps greatly here). Local rules vary, but the majority of gas stations and other locations that sell oil will accept your used oil.
The amount of oil required by an Audi A4 Quattro.
The oil fill volume for the 2.0T B-Cycle 2018-2020 A4 is 5.49 quarts, or 5.2 liters. The A4 Allroad 2.0T has a 4.7 quart (4.5 liter) oil fill capacity from 2013 to 2017. The oil fill volume for the 2.0T A4 from 2018 to 2020 is 5.4 quarts, or 5.2 liters.
What fuel capacity does an Audi A4 have?
The 1.8L VW Passat engines can hold 4.3 liters of oil. Put the oil fill cap back on. Start the engine, and let it run for around 30 seconds.
What kind of oil does a 2009 Audi A4 consume?
6.7L (7.0qt), or roughly 5.0 L. (5.3 qt.) * Oil and fluid part numbers are for reference only. See the Repair Manual and/or Maintenance Manual in ElsaWeb for details on proper fluid level and filling.