Bluetooth is not supported by the Audi Q5/multimedia Q7’s interface (MMI). However, a portable Bluetooth wireless audio receiver that links to your car directly can be purchased for about $10. Making and receiving phone calls is also possible thanks to the built-in microphone.
In This Article...
How can I pair my Bluetooth with my 2016 Audi Q5?
Step-By-Step Guide to Pairing Your Smartphone with Audi MMI Bluetooth
- Place your Audi A4 in PARK while turning on the ignition.
- On your Apple or Android device, turn on Bluetooth.
- Bluetooth should be in pairing mode.
- On the Audi MMI Display, choose PHONE.
- Choosing CONNECT Mobile Device.
I want Bluetooth in my Audi Q5, but how?
Android Auto Setup for Audi
- Make sure your mobile device has Bluetooth turned on.
- Turn on your Audi, then put it in PARK.
- Press Phone > Connect Mobile Device on your Audi’s touchscreen.
- On the Audi touchscreen, choose the device you want, and make sure the PINs on both of them match.
When did Bluetooth become available in vehicles?
The first Bluetooth hands-free automobile kits were released in 2001. Since then, Bluetooth has improved both the in-car experience and our roadways’ degree of safety.
Has the 2014 Audi q5 Bluetooth?
Obtain the media you want from connected sources. SD card, DVD player, jukebox, and Audi Media Interface (AMI). MMI Navigation Plus comes with the iPod AMI cable as standard. You can find the AMI connection in your glove compartment.
Can the Audi Q5 play music over Bluetooth?
Any Bluetooth-enabled device, including Android phones and the iPhone, may stream music via your car using this somewhat more expensive substitute for the standard A2DP adaptor. This makes it quite simple because the majority of Audi infotainment systems include the necessary 30-pin connector, which is found in your glove box.
Has the 2012 Audi Q5 Bluetooth?
I wouldn’t have purchased the car I did if I had known that the 2012 didn’t support Bluetooth audio streaming. I had Pandora installed in my 2011 Tiguan and 2014 Passat, and I anticipated the Audi would function similarly.
What does an Audi’s MMI do?
In order to reduce the amount of buttons and provide a more streamlined interior design, the Audi MMI (Multi Media Interface) system was developed. It unifies the controls for audio, vehicle settings, and accessible navigation under a single interface.
Central Display
Most cars with the Audi MMI system have the center display. The display is typically located near the top of the dashboard and retractable (as seen in the Audi A1 Sportback and Audi A3 lineup), however it is occasionally fixedly mounted (like in the Audi A5 range). These panels don’t use touch technology; instead, they operate using a combination of rotary knobs, buttons, and touchpads on an MMI control panel situated in the middle of the tunnel.
Everything from your music and Bluetooth connections to the color of the interior lighting and the audio balance may be changed on this screen.
You’ll find touchscreen panels that are flawlessly integrated into the piano black center console on high-end automobiles like the Audi A6 range and A8 Saloon. Audi likes to refer to this configuration as “MMI Touch.” The touchscreen buttons will glow when the engine starts and provide haptic feedback so you may use them without taking your eyes off the road.
Even though it can be a little tricky when moving quickly, there are many customization options. To make it simple to access your favorite contacts or radio station, for instance, you can set shortcuts.
Driver’s Binnacle
The driver’s binnacle, which previously contained a variety of analog speedometers, odometers, and rev counters, has undergone a complete digital makeover.
Prior to switching to a 3.5 inch central digital panel, Audi first used hybrid digital and analogue dials. However, the Audi Virtual Cockpit, a full-color digital display, has taken its place in more recent and expensive models.
The Virtual Cockpit allows the driver sightline access to everything, including music, contacts, and the onboard navigation system in addition to fuel and range statistics. The Virtual Cockpit is a secondary screen that most Audi models use to supplement a huge primary display. The Virtual Cockpit almost eliminates the need for this center display, allowing for a more basic dashboard design, as shown by the 2015 Audi TT series.
Standard on this display are digitalized speed and RPMdials, but you may change their size by pressing a button (conveniently situated on the steering wheel) to make room for other data.
The largest advantage of having your sat nav directly in front of you and utilizing the entire 12.3 inches of screen space is made possible by this highly configurable full-color digital display. It’s obviously lot simpler to follow without averting your eyes from the road.
Rear Passenger Display/Controls
The Audi A8 (Audi’s flagship saloon) has a retractable tablet in the rear armrest that lets passengers alter most settings. This includes adjusting the passenger seat as well as changing the TV or radio channel (all of which are additional). Only the Audi A8 has access to this feature at the moment.
What about Bluetooth audio in the 2012 Audi A5?
Mobile phones, the handset*, and Bluetooth audio players can all be Bluetooth-connected to the MMI system.
Press the rotary pushbutton to select Bluetooth, then turn it off. The MMI display will show the Bluetooth menu (see Fig. 1).
The MMI system’s Bluetooth feature can be turned on or off. The MMI display will show the Bluetooth sign (see Fig. 1) when this feature is enabled.
It is possible to turn on or off the MMI system’s discoverability for Bluetooth audio players or mobile phones/handsets*. For approximately five minutes when the car is stopped and the ignition is turned on, if you choose auto, mobile phones/the handset* or a Bluetooth audio player can find the MMI system. After this time, discovery is turned off. Even when discoverability is disabled, mobile devices or players that have previously been bonded can connect over Bluetooth. To keep your automobile phone from being found by outsiders once you’ve bonded your cell phone, you should turn off this feature.
The MMI system’s discoverability option is automatically turned off when audio files are played over a bonded Bluetooth audio player since otherwise the files might not play correctly.
Before choosing Bluetooth audio player as the source in media mode, the Bluetooth audio player function must be turned on.
Link. When not using the Bluetooth audio player, turn off the Bluetooth audio player function to prevent issues when using the phone or media.
A list of every Bluetooth device that has been joined to the MMI system is visible. The Bluetooth icon indicates which Bluetooth device is currently connected.
Select a device and use the feature “Delete Bluetooth device” to remove each bonded Bluetooth device one at a time.
By choosing the Bluetooth device and modifying the profile via the Connect function, you can change the SIM Access Profile (Car phone), the Handsfree Profile, and the Audio player profile when mobile phones are connected (the Audi A5 must be stationary). To unbind the currently linked device, use the function Disconnect.
A list of up to 50 recognized devices is shown. When you try to reconnect with these Bluetooth devices, they might not be in range anymore.
The Audi A5 base station’s name (such as “AUDI MMI 2613”) is displayed and editable on your car telephone kit.
By selecting Yes, you can erase all bonded Bluetooth devices. One by one, bonded handsets* (such as “AUDI BTHS”) must be deleted.
- The MMI system allows you to bond many mobile devices, although only one connection is active at once.
- The Bluetooth profile (Car phone, Handsfree, or Audio player) that was most recently enabled (when you reconnect a Bluetooth device that has already been linked to the MMI system) is connected first.
How can I tell if my automobile is equipped with Bluetooth?
Look around on your phone if you’re unsure whether or not your mobile device is Bluetooth-ready. If your phone supports Bluetooth, you should typically be able to find an option for it by going to the menu on your phone and then selecting the Tools menu.
Is Bluetooth available on the Audi Navigation Plus?
The Volkswagen MFD[2] used in some Volkswagen, Skoda, SEAT, and Ford Galaxy vehicles is remarkably similar to the RNS-C and RNS-D devices in appearance and functionality. The gadgets’ common characteristics, internal circuitry, tiltable LCD screens, and other user interface components are the same across brands. However, there are frequently variations in each hardware type.
The RNS-C models use the ‘non-DX’ map system, which necessitates numerous CDs per nation (for example, there is a CD for Germany North, a CD for Germany South, and one CD containing only key routes). These models can be identified by a part number ending in 192A to 192E. The RNS-C only supports AM and FM, and it does not use antenna diversity.
The “DX” map system is used by RNS-D models with part numbers that end in 192F or later. This system employs compressed data and necessitates fewer media changes. A faster processor and more memory have also been added to the hardware, along with new features and options like a compass display and Bluetooth handsfree or voice control. The radio tuner utilizes antenna diversity with two antenna inputs and also supports LW.